BrassCraft 10-Pack 12.88-in L x 9.25-in W x 1.25-in D 0.5-PSI Stainless Steel Water Heater Connector



Brasscraft’s safety+plus gas connector combines patented excess flow technology with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the safety+plus excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+plus excess flow valve (EFV) automatically resets once the gas line is properly repaired. Brasscraft's stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the pro coat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide the most complete corrosion resistance.

  • 5/8-in OD x 36-in coated stainless steel gas connector, 1/2-in MIP EFV x 1/2-in MIP (3/8 In. FIP tap)
  • Gas range, dryer and water heaters with gas ratings up to 107,000 BTU's
  • Safety+plus EFV helps protect against gas fires and explosions due to gas line ruptures or disconnects at the appliance
  • Safety+plus EFV will automatically reset once the gas line has been properly repaired
  • Safety+plus EFV is omni-directional and can be installed in any position
  • Pro coat coating is corrosion-resistant to harsh chemicals as well as UV rays and salt
  • 100% Performance and leak tested
  • Temperature rating: -20 degrees F to 150 degrees F
  • CSA certified to ANSI Z21.24/CSA 6.10 and ANSI Z21.75/CSA 6.27
Download Our Manuals

Currently no manuals available for this product. Please check product description or call our sales support team if you have any further queries.

Material Stainless steel
Use Water heater connector
Inlet Fitting Size (Inches) 1/2 in. I.D. (5/8 in. O.D.)
Outlet Fitting Size (Inches) 1/2 in. MIP
Inlet Fitting End Type Pipe thread
Outlet Fitting End Type Pipe thread

Tips, Support & Plumbing Resources For Homeowners

requestaquote Get Free Quotes callnow 888-880-2779